E3 Frame Module Combination (3 Ports)
E3 FRAME
Line module label
E3 I/O
I/O module label
•
3
Number of I/O ports
•
First supported: 1.1.0
•
Final supported: 7.0.x
Software release
•
60 W
•
Unchannelized E3 for Frame
Description
•
Non-ASIC
Type
•
E3
•
HDLC framing
Capability
•
See
ERX Module Guide, Appendix A, Module Protocol Support
for information
about the layer 2 and layer 3 protocols and applications that this module
combination supports.
Software features
•
ERX7xx models
•
ERX1410 router
Model compatibility
•
SRP-5G
•
SRP-5G+
•
SRP-10G
SRP module compatibility
•
1:N redundancy
Module redundancy support
•
BNC 75-ohm connector
•
The transmitted signal complies with ITUT G.703, Physical/electrical
characteristics of hierarchical digital interfaces (November 2001) for cable
lengths from 0–137 m (0–450 feet).
•
See
ERX Hardware Guide, Chapter 5, Cabling ERX Routers
for more information.
Cables and connectors
•
See
ERX Module Guide, Appendix B, Module LEDs
.
LEDs
•
See
Monitoring Interfaces
in the
Configuring T3 and E3 Interfaces
chapter of
the
JunosE Physical Layer Configuration Guide
for Release 8.0.x and earlier.
Alarms, errors, and events
27
Copyright © 2010, Juniper Networks, Inc.
E3 Frame Module Combination (3 Ports)
