Juniper Advanced Threat Prevention Appliance, Cli Command Reference Manual, Page: 86 / 120

Juniper Advanced Threat Prevention Appliance
78 Copyright© 2018, Juniper Networks, Inc.
show (diagnosis mode)
Table 4-19 show
Description
Sets the logging levels for Juniper ATP Appliance components from diagnosis
mode.
See Also: show (server mode)
Product(s) CLI All-in-One | Collector | Core CM | Mac Mini OS X Detection Engine
Mode(s) diagnosis
Syntax
show
Parameters
Example
The following example displays the connected Traffic Collector status.
osx-1(server)# show devicetype
Device type: slave_core.
device
{collectorstatus
| | corestatus |
slavecorestatus} Display connected device statistics for Traffic
Collector, CoreCM, or Mac Mini Detection Engine
“Secondary core.”
NOTE: Not available from the Mac Mini CLI.
protocol {web |
email} Displays the session counts for network web or email
protocols. NOTE: Not available from the Mac Mini CLI.
objects Displays the current number of file objects.
NOTE: Not available from the Mac Mini CLI.
logging
Displays the currently-configured logging level.
See Also: set (diagnosis mode) logging
log error
traceback Displays only the tracebacks (if any) generated by
Juniper ATP Appliance OS process error logs. A traceback is
stack
of functions that were executing when an error
condition was encountered.
log error last
<integer: number
of lines to
display> Displays n [1-1000] lines of the contents of the
common log file.
Example:
h l l t 12