Juniper Advanced Threat Prevention Appliance Cli Command Reference Manual Download Page 58

Page: 58 / 120

Juniper Advanced Threat Prevention Appliance

set (server mode)

Table 3-18 set

Description

Configure the system settings.

Product(s) CLI

All-in-One | Collector | Core CM | Mac Mini OS X Detection Engine

Mode(s)

Syntax

set [autoupdate {on | off} | cli timeout secs | clock | cm
address | support {enable | disable} localmode {enable |
disable}| passphrase

string

| dns | firewall {all <backup

| flush> | whitelist} | hostname

string

| ip interface

{management | alternate-exhaust}| ntpserver | password |
proxy {config | enabled | remove} | timezone

string

uipassword]

Parameters

Note:

vCore for AWS

does not use the
following CLI
commands:

set ip
set hostname

[Users cannot set static
IP address or change
the hostname directly
on an EC2 AWS
instance]

(See columns below)

autoupdate
{content |
software} {on |
off}

Turn on or off automatic product updates.

set autoupdate content on

cli

secs

Sets CLI period in seconds (0 indicates
no timeout).

clock

Sets the current date and time.

address

Sets the IP address of the Central Manager and
netmask using slash notation; ex:

AAA.BBB.CCC.DD/X

set support
{enable |
disable} |
{localmode}

Enables remote SSH login “support” account or
localmode enable|/disable.

dns

Sets DNS (or enables DHCP for DNS) for the manage-
ment interface by default if interface is unspecified.

Summary of Contents for Advanced Threat Prevention Appliance




















































































































Search results

Summary of Contents for Advanced Threat Prevention Appliance

Reviews:

Juniper Advanced Threat Prevention Appliance, Cli Command Reference Manual, Page: 58 / 120

Search results

Summary of Contents for Advanced Threat Prevention Appliance

Reviews: