Juniper ACX500, Hardware Manual

Page: 113 / 265

Table 28: Connector Pinout for the Console Port
Pin Signal Description CPU Direction
1 RTS Request to Send Routing Engine Out
2 NC No Connect – –
3 TXD Transmit Data Routing Engine Out
4 Ground Signal Ground – –
5 Ground Signal Ground – –
6 RXD Receive Data Routing Engine In
7 NC No Connect – –
8 CTS Clear to Send Routing Engine In
Management Port Connector Pinout Information for ACX500 Routers
The management port—labeled MGMT—on an ACX Series router uses an RJ-45 connector to connect to
a management device for out-of-band management.
The port uses an autosensing RJ-45 connector to support a 10/100/1000BASE-T connection. Two LEDs
indicate link and /activity on the port and the administrative status of the port.
Table 29 on page 105 provides the pinout information for the RJ-45 connector for the management
port.
104