Jungheinrich EJD 220, Operating Instructions Manual

Page: 13 / 226

A Correct Use and Application
1 General
The truck must be used, operated and serviced in accordance with the present
instructions. All other types of use are beyond its scope of application and may result
in damage to personnel, the industrial truck or property.
2 Correct application
NOTICE
The maximum load and load distance are indicated on the capacity plate and must
not be exceeded.
The load must rest on the load handler or be lifted by an attachment approved by the
manufacturer.
The load must be fully raised, see page 85.
– Lifting and lowering loads.
– Stacking / retrieving loads.
– Transporting lowered loads.
– Do not travel with a raised load (>500 mm).
In double-decker mode the load handler must not be raised higher than 1800 mm.
The bottom load must be heavier than the upper load.
– Do not transport or lift passengers.
– Do not push or pull loads.
11
04.19 en-GB