Jungheinrich EJC M10, Operating Instructions Manual, Page: 41 / 73

0
509
.GB
E 12
7 Display instrument (CanDis) (
o
)
The instrument shows:
In addition, service messages for the electronic components and parameter changes
are displayed.
Discharge status display
Setting limits for the additional “Warning” (20) and “Stop” (17) displays will depend on
the battery model set.
The available capacity is shown via 8 LED bars. The two bottom bars are always off.
The current battery capacity is shown by the illuminated LED bars.
8 bars correspond to full battery capacity, 1 bar corresponds to the minimum available
capacity.
If only one LED bar is lit, the battery capacity is almost depleted and the “Warning”
indicator (20) is lit. The battery must be charged immediately.
If no more LED bars are illuminated, the “Stop” indicator (17) lights up. Lifting is now
inhibited. The battery must be charged.
16 Capacity display bars
Battery residual charge status
17 Stop symbol; lift cutout,
Battery charge required
18 6 digit LCD display;
hourmeter, input display, error display
19 T symbol appears during operation
when the discharge indicator is set
to maintenance-free battery
20 Warning - pre-warning symbol,
Battery charge recommended
21 Battery charge display
(on-board charger only)
20
19
21
16
17
18
0
509
.GB
E 12
7 Display instrument (CanDis) (
o
)
The instrument shows:
In addition, service messages for the electronic components and parameter changes
are displayed.
Discharge status display
Setting limits for the additional “Warning” (20) and “Stop” (17) displays will depend on
the battery model set.
The available capacity is shown via 8 LED bars. The two bottom bars are always off.
The current battery capacity is shown by the illuminated LED bars.
8 bars correspond to full battery capacity, 1 bar corresponds to the minimum available
capacity.
If only one LED bar is lit, the battery capacity is almost depleted and the “Warning”
indicator (20) is lit. The battery must be charged immediately.
If no more LED bars are illuminated, the “Stop” indicator (17) lights up. Lifting is now
inhibited. The battery must be charged.
16 Capacity display bars
Battery residual charge status
17 Stop symbol; lift cutout,
Battery charge required
18 6 digit LCD display;
hourmeter, input display, error display
19 T symbol appears during operation
when the discharge indicator is set
to maintenance-free battery
20 Warning - pre-warning symbol,
Battery charge recommended
21 Battery charge display
(on-board charger only)
20
19
21
16
17
18