Jungheinrich EFX 410, Operating Instructions Manual

Page: 185 / 404

4.15.1
Manual traverse/rotate operation (
t
)
Z
In manual traverse/rotate operation the fork
carriage rotates as the attachment is
moving.
Requirements
– Prepare the truck for operation, see
page 138 or see page 139.
Procedure
• Do not press the dead man's switch (20).
• Press the key (104) under the
"synchronised rotate menu change"
symbol (173).
The display changes from the menu item
“synchronised
rotation menu
change” (173) to "synchronised fork
rotation to the right " (175) or
"synchronised fork rotation to the
left" (174).
Z
The rotation speed cannot be changed.
The traverse speed is proportional to how
far the "hydraulics function" control
lever (113) is moved. Manual traverse/
rotate operation can be cancelled by
releasing the (104) key or the "hydraulic
functions" control lever (113). The
attachment must then be moved manually
to the home position.
• Synchronised fork carriage rotation to the
right and load handler traverse to the left:
• Press and hold down the key (104)
under the "synchronised fork rotation to
the right" symbol (175).
• Turn the "hydraulic functions" control
lever (113) anticlockwise until the home
position has been reached.
• Synchronised fork carriage rotation to the
left and load handler traverse to the right:
• Press and hold down the key (104)
under the "synchronised fork rotation to
the left " symbol (174).
• Turn the "hydraulic functions" control
lever (113) clockwise until the home
position has been reached.
The attachment is located at the right or left
mechanical limit position of the swivel
traverse frame and the forks are rotated
through 180°.
113 20 104
175 174
113 20 104
173
183
04.19 en-GB