Jungheinrich EFG 110, Operating Instructions Manual

Page: 33 / 188

4.3 Truck capacity plate
CAUTION!
Accident risk from fork replacement
If you replace the forks with ones that differ from the originals, the capacity will
change.
u When replacing the forks you must attach an additional capacity plate to the truck.
u Trucks supplied without forks are given a capacity plate for standard forks (length:
1150 mm).
The capacity plate (14) gives the capacity Q (in kg) of the truck for a vertical mast. A
table indicates the maximum capacity with a given load centre distance D (in mm)
and the required lift height h
3
(in mm).
14
43 42
The truck capacity plate specifies the type and serial number of the truck and
indicates the capacity with the fork arms (
t
) (42) or the fork extensions (
o
) (43) in
as-delivered condition.
Capacity plate version in accordance with Australian guidelines (44)
33
10.20 en-GB