Jungheinrich EFG 110, Operating Instructions Manual

Page: 25 / 188

3.5 Tyre type
WARNING!
The use of tyres that do not match the manufacturer's specifications can result
in accidents.
The quality of tyres affects the stability and performance of the truck.
Uneven wear affects the truck's stability and increases the stopping distance.
u
When replacing tyres make sure the truck is not skewed.
u
Always replace tyres in pairs, i.e. left and right at the same time.
Z
When replacing rims and tyres fitted at the factory, only use the manufacturer’s
original spare parts. Otherwise the manufacturer’s specifications cannot be ensured.
If you have any queries contact the manufacturer's customer service department.
Description EFG 110 EFG 113 EFG 115
Front tyres
SE *) 18 x 7-8
Full rubber*) 18 x 6 x 12 1/8“
Pneumatic*) 180 / 70-8; Diagonal, 16PR;
Tyre pressure bar 10
Torque (Nm) 170
Rear tyres
SE*) 18 x 7-8
Full rubber*) 18 x 6 x 12 1/8"
Pneumatic*) 180 / 70-8; Diagonal, 16PR;
Tyre pressure bar 10
Torque (Nm) 170
*) The models listed in the table correspond to the standard version. Other tyres can
be used depending on the truck's equipment.
25
10.20 en-GB