3
Safety Regulations for Checks
Lifting and jacking up
WARNING!
Lifting and jacking up the truck safely
In order to raise the truck, the lifting gear must only be secured to the points
specially provided for this purpose.
In order to raise and jack up the truck safely, proceed as follows:
u
Jack up the truck only on a level surface and prevent it from moving accidentally.
u
Always use a jack with sufficient capacity.
u
In order to raise the truck, the lifting gear must only be secured to the points
specially provided for this purpose, see page 21.
u
When jacking up the truck, take appropriate measures to prevent it from slipping or
tipping over (e.g. wedges, wooden blocks).
Cleaning
CAUTION!
Fire hazard
Do not use flammable liquids to clean the industrial truck.
CAUTION!
Risk of component damage when cleaning the truck
Do not clean with a steam jet.
Z
After cleaning, carry out the test operations as described, see page 112.
Consumables and used parts
CAUTION!
Consumables and used parts are an environmental hazard
Used parts and consumables must be disposed of in accordance with the applicable
environmental-protection regulations. Oil changes should be carried out by the
manufacturer's customer service department, whose staff are specially trained for
this task.
u
Note the safety regulations when handling these materials.
WARNING!
The use of wheels that do not match the manufacturer's specifications can
result in accidents
The quality of wheels affects the stability and performance of the truck.
Uneven wear reduces truck stability and increases the stopping distance.
u
After replacing wheels, make sure the truck is not skewed.
u
Always replace wheels in pairs, i.e. left and right at the same time.
104
11.19 en-GB
Summary of Contents for AMW 22
