digital audio
modular
processing system
C8000
4/8/16 channels DSP with SDI & system-bus I/O
C8492(B)
page
14/30
Important Note!
The remainder of this manual refers to the C8492-16S version
(16 channel and surround license enabled). Some settings are impossible for a four channel license,
but the parameters for the audio processor are the same.
SETUP
This page shows the function blocks which are available for the respective programs. The display
depends on the program configuration of the DSPs. Below an example where
DSP 1 is configured for 5.1 + 2 whereas DSP 2 is configured for 4 x 2 program processing:
SDI Bypass
[Off / On]
You may bypass the audio de-embedder / embedder for testing or
trouble shooting purposes.
Relay Bypass
[Off / On]
The main SDI pass from SDI IN to SDI OUT 1 has a power fail
bypass relay. The relay may be turned off manually for testing or
trouble shooting purposes.
Relay Wait Time
[3 … 60 seconds]
After Power Up
In order to have the DSP operational and all module function blocks
up and running before processing starts you may delay the moment
of switching on the signal path by x amount of seconds.
