Universal dimming station 4-gang
Light Management
Universal dimming station 4-gang
Art.-No.: UDS 4 REG HE
Operating instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.
Danger of electric shock. Always disconnect before carrying out work on the devise or
load. At the same time, take into account all circuit breakers that supply dangerous
voltage to the device or load.
Danger of electric shock. Device is not suitable for disconnection from supply voltage.
The load is not electrically isolated from the mains even when the device is switched off.
Do not connect any electronic lamps, e.g. switchable or dimmable compact fluorescent
lamps or LED lamps. Device can be damaged.
Fire hazard. For operation with inductive transformers, each transformer must be fused
on the primary side in accordance with the manufacturer's instructions. Only safety
transformers according to EN 61558-2-6 may be used.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1: Device components
(1) Load outputs
A1...A4
(2) Keypad for local control
(3) Button
Prog
,
LED Prog
(4) Status LEDs for load outputs
A1...A4
(5) Connection of control sections or control voltage
(6) Activation outputs
A1'...A4'
/ Switching outputs
E1 ON/OFF...E4 ON/OFF
(7) Connection
Central ON/OFF
(8) Connection of hotel card switch
(9) Connection for mains supply
1/17
82577203
J:0082577203
31.05.2011