manualshive.com logo in svg

Jung TK IS A 514 A Series, Product Information, Page: 17 / 31

Share
Download
Jung TK IS A 514 A Series Product Information Download Page 17

 

17 

Ring tone selection 

 
Sings and symbols  

 

acknowledge tone 

 

ring tone  

 

slow LED flashing: 0.5 s ON / 0.5 s OFF 

 

fast LED flashing: 0.125 s ON / 0.125 s OFF 

 

LED pulse flashing:

 0.5

 s ON / 

1.5

 s OFF 

 

LED ON 

short pushing of button  

push button until …. 

 

 

 

 

 

release the button 

 

Ring tone volume / Ring tone OFF/ON 

 

 

 

 
 
 
 
 
 
 
 

 

 
 
 
 

 

 

The ring tone volume is adjustable in 5 levels:  
1, 2, 3, 4 and OFF (ring tone is switched OFF). 
 

•

  Push ring tone button (approx. 1 s) 

 

•

  You can hear the adjusted ring tone 

 

•

  now the volume is one level louder 

 

 

Repeat the action as long as the desired volume is  
reached. 
 

 

 

 
 
 
       

 

 

 

 

Ring tone OFF: 
 

•

  Repeat the action until the level OFF is adjusted.  

The LED of the ring tone button is ON. 
 

•

  push the button again to turn the ring tone ON 

 

Summary of Contents for TK IS A 514 A Series
































Reviews:

No comments