Jung LB management, Manual

Page: 124 / 196

SETTING VENTILATION POSITION
Proceed as follows to set the ventilation position:
Move blinds up.
The blinds control switches off
automatically after approx. 2
minutes.
2 minutes
Press and hold button (> 1 second).
Blind moves down.
Press and hold UP and DOWN
buttons simultaneously.
The blind stops for 4 seconds and
then moves further downwards.
When the desired ventilation
position is reached, release
buttons and ...
> 1 second
4 seconds
desired
ventilation position
...press UP button within 4
seconds.
The ventilation position
is saved and the blind
moves back to the
upper end position
The saved value is overwritten when you save a new ventilation position.
5.3.4 Reversal time
In order to prevent any overvoltages that can damage the insert and motor for any reversal
of the travel direction during an upward or downward movement, there is a reversal pause of
approx. one second between switching off and restarting the drive.
124 LB MANAGEMENT SHADING