Switch actuator, 2-gang / blinds actuator, 1-gang
Figure 4: Cable spacing
Minimum spacing between the mains voltage and bus/extension wires: 4 mm (Figure 4)
Figure 5: Connection of load
Observe ambient temperature. Ensure adequate cooling.
￭
Connect the device to KNX with the correct polarity.
￭
Connect load as shown in the connection example (Figure 5).
￭
If required, connect potential-free contacts or dew/leakage sensors to inputs 1...3, or NTC
temperature sensors to input 3 (Figure 2).
￭
Install the device in the appliance box.
￭
In secure operation: The device certificate must be removed from the device and stored
securely.
The COM reference potential must not be connected together with COM connections of
other devices!
5 / 9
82404203
26.01.2021
J0082404203