Jung J630D, Manual

Page: 15 / 316

J630D
26.7.02 9
0.3 General terms and conditions of delivery
Prices
We reserve the right to charge the prices valid on the day of delivery.
Reservation of title
We retain full title to all deliveries pending settlement of all payments due on this
supply contract. Our deliveries may only be pledged subsequent to full payment
of all claims arising from the delivery.
Passage of risk
The risk for our delivery shall pass to the ordering party immediately following dis-
patch of the delivery from the works, including in those cases in which carriage
prepaid delivery is agreed. Should shipment be delayed at the request of the or-
dering party, the full risk shall pass to our customer on the day on which readiness
for dispatch is notified.
Liability for defective delivery
We provide a 6-month warranty on all deliveries made by us, whereby we under-
take to remedy all defects and damages to the supplied goods at no charge, to the
extent that such defects and damages are verifiably caused by defective materials
or faulty work performed in the workshop. The 6-month warranty period always
commences on the day on which the risk passes to the customer.
JUNG spare parts installed by other companies or by the customer are not subject
to warranty or warranty claims.
Special conditions for new machines
We furnish a full 12-month warranty on all new JUNG grinding machines delivered
for one-shift operation up to a maximum of 2000 operating hours. The warranty
period shall terminate as soon as the stipulated number of operating hours has
been exceeded.
We shall repair defects and damages to our new machines at no charge within the
warranty period.
The warranty period always commences on the day on which the risk passes to
the customer; should machines be commissioned by K. JUNG Service, this is the
day on which the commissioned machinery is transferred to the customer.
General limitations
All defects detected shall be notified to us immediately.
No warranty is assumed under any circumstances for ensuing damages or for da-
mages due to extraneous causes. No warranty is assumed, goodwill services due,
extended liability applicable or compensation paid for defects and damages ari-
sing as a result of improper operation. This disclaimer also applies to defects ari-
sing due to the use of incorrect technology, unsuitable tools, coolants and
machining parameters or ambient temperature or vibration conditions which pre-
vent the machinery from functioning or being used to the required level of precisi-
on. Notwithstanding the customer’s right to rectification of defects at no charge,
the customer shall not be entitled to assert any claims or rights on the basis of dis-
advantages suffered, regardless of the legal standing of the same. Our warranty