Art. No. DS 4092 TS
4.2.5 Parameters
4.2.5.1 Parameter push-button / rotary knob
Description
Values
Comment
h
Push-button (PB) / Rotary knob (RK)
Use LED display
function?
yes
no
If the Status LEDs are to be used for
display tasks, this parameter must be
set to "Yes". The parameter pages "PB
Status LED" and "RK Status LED" then
become visible and contain further LED
parameters. In the case of "No", the
Status LEDs are permanently
deactivated for display tasks. Both
Status LEDs are then only activated
when there is an active alarm message.
If the LED display functions are
required, then special design covers
with light guides must be used.
i
The LED display function can only
be configured and used with
Version 1.2 of the application
program! If Version 1.1 of the
application program is used, the
Status LEDs are only activated
when alarm signalling is active.
Light period of status
LED for button-press
indicator
1 sec
2 sec
3 sec
4 sec
5 sec
This parameter defines the light period
of both Status LEDs for the LED function
"Button-press display".
This parameter is only visible if the LED
display function is enabled.
Use buzzer signalling
function ?
yes
no
If the internal buzzer of the device is to
be used for signalling tasks, this
parameter must be set to "yes". The
parameter page "PB/RK buzzer"
containing additional parameters of the
buzzer will then be displayed. If "no" is
selected, the buzzer is deactivated
permanently.
Disabling function
disabled
enabled
With this parameter, the disabling
function of the push-button and rotary
knob can be activated centrally.
Polarity of disabling
object
disable = 1 /
enable = 0
Disable = 0 /
enable = 1
This parameter defines the value of the
disabling object at which the disabling
function is active.
Page 95 of 143
Software "Rotary sensor with extensions 10FE1x"
Parameters
