3
Button
2-
Button
2+
Channel 2-
Channel 2+
Light scene 2
Light scene 3
4
Button
3-
Button
3+
Channel 3-
Channel 3+
Light scene 4
Light scene 5
i
Function switch 1 can be used to disable the saving of light scenes for buttons 1 - 3.
i
The buttons 4+ and 4- always correspond to the channels 4+ and 4-.
Teaching transmitter in radio receiver
In order for a receiver to understand a radio telegram from the transmitter, the receiver has to
"learn" this radio telegram. A channel of the transmitter can be taught in any number of
receivers. The teaching procedure only results in an assignment in the receiver.
When teaching a transmitter, the range of the receiver is reduced to about 5 m. The distance
between the receiver and the transmitter being taught should therefore be between 0.5 m and
5 m.
The function switch for the channel being taught is set to
ON
o
Switch radio receiver to programming mode (see instructions for radio receiver).
o
Press the "+" or "-" button of the desired channel longer than 1 second.
o
Exit programming mode of the receiver (see instructions for the radio receiver).
The channel of the transmitter has now been taught in the radio receiver.
Teaching a light scene button
The function switch for button being taught is set to
OFF
o
Switch radio receiver to programming mode (see instructions for receiver).
o
Press the light scene button for longer than 3 seconds.
o
Exit programming mode of the radio receiver (see instructions for the radio receiver).
Light scene button has been taught.
Deleting All Off
If a certain receiver should not respond to the All Off button, then this function has to be
deleted.
o
Switch receiver to programming mode (see instructions for receiver).
o
Press All Off button
1-
for longer than 10 seconds.
Function has been deleted.
o
Exit programming mode of the receiver (see instructions for the receiver).
6 Appendix
Remove empty batteries immediately and dispose of in an environmentally friendly
manner. Do not throw batteries into household waste. Consult your local authorities
about environmentally friendly disposal. According to statutory provisions, the end
consumer is obligated to return used batteries.
6.1 Technical data
Rated voltage
DC 3 V
Battery type
1×lithium CR 2032
Ambient temperature
0 ... +55 °C
Relative humidity
max. 80 % (No moisture condensation)
Degree of protection
IP 20
Radio frequency
433.05 MHz ... 434.79 MHz
Transmitting range in free field
typ. 100 m
Transmission capacity
< 10 mW
7/8
32562723
J0082562723
21.07.2016
Radio Management
Flat wall-mounted radio transmitter
