Jung 230061SR, Operating Instructions Manual

Page: 3 / 9

Switch actuator / blinds actuator
Logic function characteristics
–
Logic gates
– Transformer (conversion)
– Disabling element
– Comparator
– Limit value switch
4 Operation
Figure 2: Operating elements
(4) Status LEDs for outputs
ON: Relay output closed
OFF: Relay output opened
Flashes slowly: output in manual mode selected
Flashes quickly: Output disabled via continuous manual mode
(6) Button ǃ
Manual operation
(7) LED ǃ
ON: continuous manual mode active / Flashing: temporary manual control active
(8) LED DŽ
ON: relay outputs closed, manual operation active
(9) Button DŽ
Short: switch on, adjust slats or stop.
Long: Move hanging upwards
(10) Button Dž
Short: switch off, adjust slats or stop.
Long: Move hanging downwards.
(11) LED Dž
ON: relay outputs open, manual control active
(12) Button ALL OFF
Open all relay outputs, stop drives
In operation with the button field the device distinguishes between a short and a long press.
–
Short: actuation for less than 1 s
– Long: actuation of between 1 and 5 s
In switching operation, the device distinguishes between the operating modes "normally
open contact" and "normally closed contact". The buttons (9 + 10) change the switching
status when pressed:
Normally open contact: switch on = close relay, switch off = open relay
Normally closed contact: switch on = open relay, switch off = close relay
The LEDs (4 + 8 + 11) always indicate the relay status.
The LEDs (4) optionally indicate the status of the outputs only temporarily (depending on
the parameters).
3 / 9
82402603 15.05.2020
J0082402603