Rotary dimmer
Light Management
Rotary dimmer with 2-way push switch
Rotary dimmer with 2-way push switch
Operating instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.
Always disconnect before carrying out work on the devise or load. At the same time, take
into account all circuit breakers that supply dangerous voltage to the device or load.
The device is not suitable for disconnection from supply voltage.
For operation with inductive transformers, each transformer must be fused on the
primary side. Only safety transformers according to EN 61558-2-6 may be used.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1: Device components
(1) Dimmer
(2) Frame
(3) Central plate
(4) Adjusting knob
(5) Fuse holder
(6) Measuring points for voltage test
(7) Release lever for plug terminal
(8) Basic brightness setter
1/5
32534523
J:0082534523
30.10.2013
