Application
Ref. no. 2103 REG ES
Page 25
of 44
Description:
Values:
Comment:
Request measured values
0
1
0 or 1
Measured values are only transmitted
when the received object for the
request matches the value configured
here.
Appr. comm. object
'Request power values'
Yes
No
Here, it is possible to enable the object
for requesting the power values.
Request power values
0
1
0 or 1
Power values are only transmitted
when the received object for the
request matches the value configured
here.
Release Channel 1
Yes
No
Access to the measured and power
values of Channel 1 can be enabled
here.
Release Channel 2
Yes
No
Access to the measured and power
values of Channel 2 can be enabled
here.
Release Channel 3
Yes
No
Access to the measured and power
values of Channel 3 can be enabled
here.
Release 3-phase values
Yes
No
Access to the measured and power
values of the three-phase current
variables can be enabled here.
Release frequency measurement
Yes
No
Access to the measured frequency can
be enabled here.
Send frequency cyclically (s)
0
...172800
The measured frequency can be
transmitted cyclically.
Setting of the seconds of the cycle time
or switch-off of this function with the
value 0.
Send frequency on change (0.1 Hz)
0
...650
The measured frequency can be
transmitted on changes.
Setting of the frequency change, at
which the measured frequency is
transmitted, or switch-off of this function
with the value 0.