16
Settings past the password prompt
can only be accessed by the
manufacturer.
Parameters adjustment mode quits
automatically when there is no input
given to the controller for 10 seconds.
Setting the Speed unit
Displayed speed unit value can be set to
Kph (kilometers per hour) or Mph (miles
per hour).
Setting the LCD Display backlight
The LCD Display backlight brightness can
be adjusted from 1 to 5. On models
equipped with an integrated headlight, its
brightness will also be set accordingly.
Setting the Auto Off time
Your Power assisted bicycle has an Auto
Off function to prevent the waste of
battery life when the bicycle is not used.
The time before the system shuts off
automatically after the bicycle has not
been used or any input has been given to
the controller can be adjusted from 1 to 9
minutes.
Setting the wheel size
The correct wheel size has been set at the
factory and should not be modified. Doing
so may result in system malfunction.
Voltage
The correct voltage has been set at the
factory and should not be modified. Doing
so may result in system malfunction.
Password
A password has been set at the factory
and prevents the access to more settings.
Only the manufacturer can access these
settings.
Turning the power off
Do not dismount your bicycle before
having turned the power assist system
off. An unexpected ignition of the
power assistance while dismounting the bicycle
can result in serious injuries.
To turn the power assist system Off:
▪
Press the
Battery’s
Power button .
The LCD Display will shut down.
Maintenance & storage
Besides your bicycle
’s regular mechanical
maintenance, for which the requirements
can be seen on the user manual that was
provided with your bicycle, there is no
maintenance related to the Power assist
system required by the rider. Do not
attempt to open any of the Power assist
system components. All service or repair
should only be carried out by a qualified
technician.
Always turn off the Power assist
system before proceeding to regular
bicycle inspection, maintenance, or
repair.
Cleaning your power assisted bicycle
The bicycle user manual that was
provided to you separately contains a
more
detailed
bicycle
washing
procedure and recommendations. It is
suggested to refer to it.
Never
submerge
any
of
the
components of the Power assist system
in water.
Summary of Contents for Rapid-E
Page 1: ......
