JUMO TYA S202, Operating Manual, Page: 10 / 99

1 Introduction
10 V1.00/EN/00709725 [Thyristor power controller TYA S202]
1.2 Typographical conventions
1.2.1 Warning symbols
Caution
Attention
ESD
Dangerous volt-
age
Hot
surface,
fire hazard
1.2.2 Note symbols
E
When accessing the inner parts of the device and returning device plug-in
units, modules, or components, please observe the regulations according to
DIN EN 61340-5-1 and DIN EN 61340-5-2 "Protection of electronic devices
from electrostatic phenomena". Use only ESD packaging for shipment.
Please note that we cannot accept any liability for damage caused by ESD.
ESD=Electrostatic Discharge
V
This symbol is used when personal injury may occur if the instruc-
tions are disregarded or not followed correctly!
A
This symbol is used when damage to devices or data may occur
if the instructions are disregarded or not followed correctly!
E
This character is used if precautionary measures must be taken
when handling electrostatically sensitive components.
This symbol is used if dangerous voltages will cause an electric shock
in the event of contact with live parts.
This symbol is used if burns can result from touching a hot surface.
Do not install any heat-sensitive components or devices close to the
power controller.