JUMO safetyM TB/TW, Operating Instructions Manual

Page: 21 / 52

7 Configuration level
19
2011-12-31
7 Configuration level
All the configuration level parameters C111 - C122 are listed in the table below.
Parameters that are not required are automatically blanked out.
h
In normal display, press for longer than 2 secs and AL will appear.
h
Press again for longer than 2 secs and C111 will appear.
Each time you press , you move to the next parameter.
All the parameters are freely accessible at the factory, but can be inhibited via the setup program.
v
Chapter 10.3 “Activating the access code”