JUMO LOGOSCREEN fd, Operating Instructions Manual

Page: 9 / 108

9
1 Introduction
B 706585.4(.1) Installation Instructions
The installation instructions describe the installation of the recorder and the
connection of the supply and signal cables. The instructions also contain a list
of the technical data.
B 706585.4
Installation instructions for recorders with die-cast zinc front
B 706585.4.1 Installation instructions for recorders with stainless steel front
B 706585.6 Setup Program
The manual describes the function of the setup program. The setup program is
available as an option.
T 706585 Data Sheet
The data sheet contains general information, the order details and the
technical data.
B 709701.0 PC Evaluation Software (PCA3000)
The operating manual describes the operation and the features of the PC
Evaluation Software.
PCA3000 serves to visualize and evaluate process data (measurement data,
batch data, messages, instrument audit trails, ...). The process data can be
read in via the CompactFlash memory card, or made available through the
PCC software.
B 709702.0 PCA Communication Software (PCC)
The operating manual describes the operation and the features of the PCA
Communication Software.
PCC is responsible for the data transfer from the recorder to a PC, or to a
network.
B 709703.0 PC Security Manager Software (PCS)
The operating manual describes the operation and the features of the PC
Security Manager Software.
The PCS ensures that only authorized persons can gain access to the system
components (instrument, PC software) and use electronic signatures on
electronic documents.
The configuration of the Security Manager can only be performed by the
system administrator.