3 Installation
20
Panel cut-out
Close mounting
3.3
Panel mounting
138
+1
138
+1
Distance between panel cut-outs
Horizontal
Vertical
Minimum clearance
20 mm
20 mm
Recommended distance (easier installation of fastening elements)
50 mm
50 mm
1
2
Step
Activity
1
Insert the device into the panel cut-out from the front until the seal is flush with the panel.
2
Insert the fastening elements into the recesses of the housing (one element on each cor-
ner, see figure) and use a screwdriver to evenly clamp them against the rear side of the
panel with a torque of 1.0 Nm.
