JUMO LOGOSCREEN 550 cf, Operating Manual

Page: 85 / 138

85
5 Setup program
Setting the
Modbus flag
h
With the left mouse button, click on the arrow pointing to the right
(
), until the register “Additional binary signals” appears
on the screen ( ).
h
Click on the register “Additional binary signals”. This automatically turns it
into an active register.
h
Clicking into the box with the left mouse button (single click) will switch the
Modbus flag.
Shifting the
Teleservice
window The Teleservice window, too, can be shifted. The same possibilities apply as
for shifting the toolbar.
v
“Shifting the toolbar” on page 80
Position the mouse pointer here, and,
holding the left mouse button down, shift the
Teleservice window to a different position.