51
8 Startup and parameterization
8.6.10
Configuring the transistor output DO1 to switch a load when the device gener-
ates a warning
When the device generates a warning message, the device status LED is orange.
The generation of a warning message can also be indicated by the switching of the transistor output
DO1.
NOTE!
The units of the displayed values and the values to be entered manually correspond to the values se-
lected in chapter 8.6.2 "Choosing the flow rate unit, the number of decimals, and the counter display
unit", page 38.
OUTPUT
DO1
WARNING
INV YES
INV NO
1. Choose the operating mode for
the transistor (inverted or not in-
verted).
DO2
DEL. 1 = 00
In versions WITH relays
1. Enter the time delay before the
switching point (value between 0
and 99 s).
2. Confirm
RETURN
In versions WITHOUT relays
