JUMO exTHERM-DR, Operating Manual, Page: 51 / 100

9 Configuration level 51
9.4 Limit value monitoring
The relay output limit value K2 can be set for monitoring of the following functions.
Parameters Comment
Value range
(default setting in bold)
9.4.1 Alarm function AF1: ON circuit in the window around the setpoint value
(1) Limit value is gap compared to setpoint value w (2) Hyster-
esis
No function, AF1 to AF8
AF2: OFF circuit in the window inversely around the setpoint
value
(1) Limit value is gap compared to setpoint value w (2) Hyster-
esis
w
1
(1)
x
0
(2)
w
1
(1)
x
0
(2)