JUMO dTRANS pH 02, Operating Manual, Page: 35 / 136

35
6 Operation
✱
Select "USER LEVEL".
All possible parameters are accessed below. Depending on the configuration
of a specific device, some of these parameters may not appear.
6.6.1 Parameters of the User level
See chapter 18.2 "Parameters of the User level", page 119.
6.7 Administrator level
- All the parameters can be edited at this level.
- At this level, it is also possible to define which parameters can be edited by
a "normal" user (operator) and which calibrations can be performed.
To get to the Administrator level, proceed as follows:
✱
Press the key for longer than 2 seconds.
✱
Use the or keys to select "ADMINISTR. LEVEL".
✱
Use the and keys to enter the password 300 (factory setting).
✱
Confirm the key.
6.7.1 Parameter level
The settings that can be made here are the same as those at the User level,
see "User level", page 34. As the operator (user) has administrator rights here,
the parameters that are locked in the User level can now also be modified.
6.7.2 Release level
All parameters can be released (modification possible) or locked (no
modification possible) for editing at operator level.
6.7.3 Basic settings
The JUMO dTRANS 02 pH has a basic setting wizard, to make it easier for the
user to configure the extensive setting options of the device and to avoid
configuration conflicts.
The basic settings are reached via ADMINISTR. LEVEL/PASSWORD/
BASIC SETTING.
PGM
PGM