JUMO dTRANS pH 02, Operating Manual, Page: 33 / 136

33
6 Operation
6.5.9 Manual mode overview
Analog outputs (optional boards)
In this example, analog outputs 2 and 3 are working normally.
Switching outputs (PSU board and optional boards)
In this example relay output 2 is in manual mode.
The device is in "normal display" mode
✱
Briefly press the or key (several times if necessary).
6.5.10 Hardware info
The device is in measuring mode (normal display)
✱
Press and hold the and keys.
Alternating display
Manual mode can only be displayed if at least one output is in manual mode.
For example Administrator level/Parameter level/Binary outputs/
Binary output 1/Manual mode "Active" or "Simulation".
To return to measuring mode:
press the
key or wait for a "timeout".
These displays are required for phone support.
EXIT
PGM