JUMO dTRANS pH 02, Operating Manual, Page: 24 / 136

6 Operation
24
6.2 Display
6.2.1 Measuring mode (normal display)
Example
(1) Binary output (relay) K1 is active
(2) Binary output (relay) K2 is active
(3) Binary input is active
(4) Keypad is locked
(5) Device status
ALARM (flashing): Broken sensor or overrange, etc.
AL R1: Controller monitoring alarm from controller channel 1
AL R2: Controller monitoring alarm from controller channel 2
CALIB: Calibration mode active
CALIB (flashing): Calibration timer elapsed
(6) Output mode
MAN.: Manual mode and/or simulation mode active
HOLD: Hold mode active
(7) Top display
Measured value and unit of the variable set by parameter "Top display"
(8) Bottom display
Measured value and unit of the variable set by parameter "Bottom
display"
(9) Operating mode
MEASURING: Standard measuring mode is active
(1) (2) (3) (5) (4) (6)
(8)
(9)
(7)
To return to measuring mode (MEASURING):
Press the
key or wait for a "timeout".
EXIT