JUMO dTRANS pH 02, Operating Manual, Page: 128 / 136

18 Appendix
128
Display
Lighting
On
With operation
Display of measured value Standard
Tendency
Bargraph
Trend chart
Large display
3 measured values
Time
Display Top/Center/Bottom No signal
Main value (standard for "Top")
Not comp. Main value
Temperature(standard for "Center" and
"Bottom")
Option input 1
Option input 1 not compensated
Option input 2
Option input 2 not compensated
Option input 3
Option input 3 not compensated
Math 1
Math 2
Differential signal
Flow rate
Partial quantity
Total quantity
Output controller 1
Output controller 2
Setpoint 1 controller 1
Setpoint 2 controller 1
Setpoint 1 controller 2
Setpoint 2 controller 2
Operating timeout 0 to 1 to 10 minutes
(0 = operating timeout is turned off)
Scaling start -2.00 to 0.00 to 15.00 pH
Scaling end 0.00 to 16.00 pH
Parameter Selection/value range
Factory setting New setting