JUMO dTRANS pH 02, Operating Manual, Page: 122 / 136

18 Appendix
122
Controllers
Controller 1 or 2
Parameter set 1 or 2
Min. setpoint
-2.00 to 0.00 to 16.00 pH
Max. setpoint -2.00 to 16.00 to 16.00 pH
Setpoint -2.00 to- 0.00 to 16.00 pH
Setpoint 2 -2.00 to 0.00 to 16.00 pH
Proportional range 0.00 to 99.99 pH
Reset time 0.00 to 9999 s
Derivative time 0.00 to 9999 s
Period time 2.00 to 60.0 to 999.9 s
Hysteresis 0.00 to 1.00 to 9.00 pH
On-delay 0.00 to 999.5 s
Delayed release 0.00 to 999.5 pH
Output limit 0 to 100 %
Min. turn-on time 0.20 to 0.50 to 99.50 s
Actuator time 10 to 60 to 3000 s
Max. pulse frequency 1 to 60 to 80 1/s
Alarm tolerance 0.00 to 1.00 - 9.00 pH
Alarm delay 0.00 to 9999 s
Configuration
Controller type
Off
Limit value
Pulse lengths
Pulse frequency
Continuous
Modulating
Controller actual value Main value
Not comp. Main value
Temperature
Option input 1
Option input 1 not compensated
Option input 2
Option input 2 not compensated
Option input 3
Option input 3 not compensated
Math 1
Math 2
Differential signal
Parameter Selection/value range
Factory setting New setting