JUMO dTRANS pH 02, Operating Manual, Page: 121 / 136

121
18 Appendix
Temperature
compensation source Temperature input
Option input 1
Option input 2
Option input 3
Manual temperature
pH compensation source Main input
Option input 1
Option input 2
Option input 3
Temperature
compensation None
Linear
TC graph
Natural waters
ASTM D1125 neutral
ASTM D1125 acidic
ASTM D1125 alkaline
NaOH 0 to 12 %
NaOH 25 to 50 %
HNO
3
0 to 25 %
HNO
3
36 to 82 %
H
2
SO
4
0 to 28 %
H
2
SO
4
36 to 85 %
H
2
SO
4
92 to 99 %
HCl 0 to 18 %
HCl 22 to 44 %
Reference temperature 15.0 to 25.0 to 30.0 °C
Filter time constant 0.0 to 2.0 to 25.0 seconds
Relative cell constant 20.0 to 100.0 to 500.0 1/cm
Temperature coefficient 0.00 to 2.20 to 8.00 1/cm
Zero point -9999 to 0 to +9999
Slope -999.9 to 100.0 to +999.9%
Binary inputs
Binary input 1 or 2
Function
No function
Manual mode
Hold mode
Hold mode inverse
Alarm stop
Freeze measured value
Key lock
Lock levels
Flow rate measurement
Reset day counter
Reset total counter
Parameter set switchover
Parameter Selection/value range
Factory setting New setting