12
3 Mounting
3
Mounting
The device may only be installed, connected and started up by qualified and authorized personnel ob-
serving these operating instructions, the applicable standards, and the legal requirements (depending
on the application).
The device does not meet the requirements for "safety accessories" within the meaning of the Pressure
Equipment Directive 2014/68/EU.
If you experience difficulties during installation and startup, please contact the manufacturer.
The device can be installed in any position.
NOTE!
The pressure sensor is not suitable for safety-critical applications.
NOTE!
The pressure sensor is not suitable for installation and application in potentially explosive areas.
NOTE!
The pressure sensor must be connected to the plant's potential equalization system via the process con-
nection.
NOTE!
Mount the device so that abrasion at the process connection is avoided.
Mounting the sensor
•
Insert the pressure sensor into the corresponding drilled hole and tighten it by hand, making sure the
profile seal and/or O-ring (if fitted) are sitting correctly
•
Tighten the pressure sensor with a suitable wrench
Wrench size and torque see "Process connections", Page 7
