JUMO dTRANS CR 02, Operating Manual, Page: 90 / 120

90
15 Retrofitting optional boards
15.1 Identifying an optional board
The packaging of the optional board is identified by a sales number.
Caution:
The instrument must be de-energized on the input and output sides!
Optional boards must only be retrofitted by qualified specialists.
ESD:
Optional boards can be damaged be electrostatic discharge. You must therefore
prevent electrostatic charges from accumulating during installation and removal.
Optional boards should be retrofitted at a grounded workstation.
Optional board Code Part no. Board view
Analog input (universal) 1 00442785
Relay (1× changeover) 2 00442786
Relay (2× NO)
This board must only be
inserted in
optional slot 1 or 3!
3 00442787
Analog output 4 00442788
2 PhotoMOS
®
relays 5 00566677