JUMO dTRANS CR 02, Operating Manual, Page: 12 / 120

3 Identifying the device version
12
3.3 Accessories (included in delivery)
3.4 Accessories (optional)
4× fastening elements, complete
a
a
For basic type extension 01 only (in the panel enclosure)
3× CON plug-in link
a
3× jumper wire
b
b
For basic type extension 05 only (in the surface-mounted enclosure)
1× seal for panel
a
1× fastening elements, complete
b
- 1× DIN rail fastening left
- 1× DIN rail fastening right
- 3× wall mount
- 3× fastening screw
Type Part no.
Holder for C rail 00375749
Dummy cover 96 mm × 48 mm 00069680
Pipe mounting set 00398162
Weather protection roof complete for basic type extension 05 00401174
PC setup software 00560380
PC interface cable including USB/TTL converter and two adapters
(USB connecting cable) 00456352
Optional board Code Part no.
Analog input (universal) 1 00442785
Relay (1× changeover) 2 00442786
Relay (2× NO) 3 00442787
Analog output 4 00442788
2 PhotoMOS
®
relays 5 00566677
Solid state relay 1 A 6 00442790
Voltage supply output DC ±5 V (e.g. for ISFET) 7 00566681
Voltage supply output DC 12 V (e.g. for inductive proximity switch) 8 00566682
Interface - RS422/485 10 00442782
Datalogger with RS485 interface 11 00566678
PROFIBUS-DP interface 12 00566679