JUMO dTRANS CR 02, Operating Manual, Page: 113 / 120

113
16 Appendix
Interface
Modbus address
1 to 254
Baud rate 9600
19200
38400
Parity None
Even
Odd
Stop bits 1
2
PROFIBUS address 0 to 99
EEPROM marking Off
On
Wash timer
Cycle time
0.0 to 240.0 hours
(0.0 = Wash contact is not active
Wash time 1 to 60 to 1800 seconds
Datalogger
Storage interval
1 to 60 to 300 seconds
Channels 1 to 4 No signal
Main value (standard for channel 1)
Not comp. Main value
Temperature (standard for channel 2)
Option input 1
Option input 1 not compensated
Option input 2
Option input 2 not compensated
Option input 3
Option input 3 not compensated
Math 1
Math 2
Differential signal
Flow rate
Partial quantity
Total quantity
Output controller 1 (standard for channel 3)
Output controller 2 (standard for channel 4)
Setpoint 1 controller 1
Setpoint 2 controller 1
Setpoint 1 controller 2
Setpoint 2 controller 2
Date year 20xx
Date month 1 to 12
Date day 1 to 31
Time hour 0 to 24
Time minute 0 to 59
Time second 0 to 59
Parameter Selection/value range
Factory setting New setting