JUMO dTRANS CR 02, Operating Manual, Page: 108 / 120

16 Appendix
108
Binary inputs
Binary input 1 or 2
Function
No function
Manual mode
Hold mode
Hold mode inverse
Alarm stop
Freeze measured value
Key lock
Lock levels
Flow rate measurement
Reset day counter
Reset total counter
Range switchover
Controller
Controller 1 or 2
Parameter set 1 or 2
Min. setpoint
0 to 9999
Max. setpoint 0 to 9999
Setpoint 0 to 9999
Setpoint 2 0 to 9999
Proportional range 0 to 9999
Reset time 0.00 to 9999 s
Derivative time 0.00 to 9999 s
Period time 2.00 to 60.0 to 999.9 s
Hysteresis 0 - 200 to 9999
On-delay 0.00 to 999.5 s
Delayed release 0.00 to- 999.5 s
Output limit 0 to 100to%
Min. turn-on time 0.20 to 0.50 to 99.50 s
Actuator time 10 to 60 to 3000 s
Max. pulse frequency 1 to 60 to 80 1/s
Alarm tolerance 0.00 to 1.00 to 16.00
Alarm delay 0.00 to 9999 s
Configuration
Controller type
Off
Limit value
Pulse lengths
Pulse frequency
Continuous
Modulating
Parameter Selection/value range
Factory setting New setting