JUMO dTRANS CR 02, Operating Manual, Page: 106 / 120

16 Appendix
106
Supply frequency 50 Hz
60 Hz
Temperature input
Temperature sensor
No sensor
Pt100
Pt1000
Cust. specs.
0 to 20 mA
4 to 20 mA
0 to 10 V
2 to 10 V
Resistance transmitter
Unit °C/°F
%
Without unit
Cust. specs.
Scaling start -100.0 to 0.0 to 499.9 °C
Scaling end -99.9 to 100.0 to 500.0 °C
Filter time constant 0.0 to 2.0 to 25.0 seconds
Manual temperature -99.9 to 25.0 to +99.9 °C
Offset -99.9 to 0.0 to +99.9 °C
Optional inputs
Analog inputs 1 to 3
Operating mode
Off
Linear
Temperature
pH measurement
Conductivity
Concentration
Cust. specs.
Stroke feedback
Chlorine, pH-compensated
Signal type 0 to 20 mA
4 to 20 mA
0 to 10 V
2 to 10 V
0 to 1 V
Pt100
Pt1000
Cust. specs.
Connection type 2-wire
3-wire
4-wire
Display format XXXX
XXX.x
XX.xx
X.xxx
Parameter Selection/value range
Factory setting New setting