JUMO DICON 400, Interface Description, Page: 5 / 44

5
1 Introduction
1.1 Preface
Please read this manual before commissioning the interface. Keep the
manual in a place that is accessible to all users at all times.
Please help us to improve this manual.
Your suggestions will be most welcome.
Phone Germany (06 61) 6003-727
abroad (+49) 661 60 03-0
Fax Germany (06 61) 6003-508
abroad (+49) 661 6003-607
H
All the necessary information for operating the interface is
contained in this manual. If any difficulties should still arise
during start-up, you are asked not to carry out any
manipulations which are not permitted. You could endanger
your rights under the instrument warranty!
Please contact the nearest JUMO office or the main factory.
E
When returning chassis, assemblies or components, the rules
of EN 100 015 “Protection of electrostatically sensitive
devices” have to be observed. Use only the appropriate ESD
packaging material for transport.
Please note that we cannot be held liable for damages
caused by ESD (electrostatic discharge).