JUMO AQUIS touch P 202580, Operating Manual

Page: 265 / 322

265
19 PC Setup Program
19.8.7 Logic formula
Logic formula must be created with the JUMO PC setup program. During data
transfer to the device, the formula are then loaded into the JUMO AQUIS touch
P together with the setup. For formula that have already been loaded into the
device, the description below the formula entry field and the alarm configuration
can also be set on the device as an alternative.
Explanation of the configuration data for "Logic formula":
v
Chapter 10.19 "Logic formula", Page 155
Open Settings:
Only Setup
r
Logic formula
r
Formula 1 to 30
To create formula, open the Formula Editor by pressing the button. With the aid
of the Formula Editor, you can select variables from the Binary selection as well
as available operators in order to add them to the logic expression in the text
window by pressing the corresponding "Add" button.
If necessary, the formula can also be edited by entering characters with the key-
board.