JUMO AQUIS 500 RS, Operating Manual, Page: 96 / 120

96
12 Appendix
12.1 Operator level parameters
If a large number of device parameters are to be configured, it is advisable to
make a note of all the parameters to be changed in the following table and to
work through the parameters in the order specified.
NOTE!
The following list shows the maximum number of changeable parameters.
Depending on the configuration, some parameters may not be visible or edit-
able on your device.
Parameter Selection/value range
per default New
setting
RS485 input
Zero point
-9999 to 0 to +9999
Slope 50 to 100 to 200 %
Zero -999.9 to +999.9 nA
Span 0.00001 to +999.9 nA/ppm or pA/ppm
Baud rate 2400
4800
9600
19200
38400
Parity None
Odd
Even
Stop bits 1
2
Device address 1 to 255
Address temperature 0 to 1 to 65535
Address main value 0 to 1 to 65535
Address of uncompen-
sated main value 0 to 1 to 65535