JUMO AQUIS 500 RS, Operating Manual, Page: 25 / 120

25
6 Operation
6.2 Display
6.2.1 Measuring mode (normal display)
Example
(1)
(2)
(3)
(4)
(5)
(6)
Relay K1 is active
Relay K2 is active
Binary input 1 is
controlled
Keypad is locked
Device status (notes)
- Alarm (e.g. overrange)
- Calib flashing (calibration
timer expired)
- Calib (customer calibration
active)
Output mode
- Manual (manual mode)
- Hold (hold mode)
(7)
(8)
(9)
(10)
(11)
Measured value
Unit of measured value
Medium temperature
Device status e.g.
- Measuring (normal)
- Status of calibration
AL R1 = alarm controller 1
AL R2 = alarm controller 2
AL R12 = alarm controller 1 and
2
(1) (2) (3) (5) (4) (6)
(7)
(8) (9)
(10)
(11)
NOTE!
To return to measurement mode (MEASURING):
Press the
key or wait for timeout.