JUMO AQUIS 500 RS, Operating Manual, Page: 11 / 120

11
3 Identifying the device
3.3 Accessories (in scope of delivery)
3.4 Accessories (optional)
4 × pluggable screw terminal
1 × small insertable jumper
1 × large insertable jumper
1 × mounting clip for cable diameter > 5 mm
2 × mounting clip for cable diameter < 5 mm
1 × mounting clip for cable diameter < 3 mm
2 × lens head screw 3.5 × 6.5
4 × spacing for panel installation
4 × hex nut for panel installation
4 × flat head screw M6 × 10
4 × mount
1 × cable gland M12 × 1.5
1 × flat gasket for cable gland M12 × 1.5
1 × reduction sealing ring M12 × 1.5
2 × cable gland M16 × 1.5
2 × flat gasket for cable gland M16 × 1.5
1 × multiple seal insert for cable gland M16 × 1.5
1 × stranded wire, PVC-insulated
1 × cable cover
Type Parts no.
Protective roof for JUMO AQUIS 500
a
a
The pipe mounting kit is required for installation of the protective roof.
00398161
Pipe mounting kit for JUMO AQUIS 500
b
b
The JUMO AQUIS 500 can be fitted to a pipe (such as a support pillar or rail) with
the pipe mounted kit.
00483664
DIN-rail mounting kit for JUMO AQUIS 500
c
c
The JUMO AQUIS 500 can be fitted to a DIN-rail of 35 mm × 7.5 mm (acc. to DIN EN
60715 A.1) with the DIN-rail mounting kit.
00477842
Support pillar with pedestal base, cantilever arm, and chain 00398163
Holder for suspended fitting 00453191
Rear case wall kit 20256x 00506351
PC setup program 00483602
PC interface cable with USB/TTL converter and two adapters
(USB transmitter cable) 00456352