7 Commissioning
32
7.6
Setting the filter time constant (damping) (DamP)
The filter time constant (damping) can be used to smooth the measured value.
Small filter time constant: the display is refreshed quickly.
Large filter time constant: Display refresh is slower.
The value is entered in seconds with two places after the decimal.
✱
Unlock the instrument, See section 7.2 "Unlocking the instrument (code
entry)", page 27.
✱
"Rotate" until the bottom line shows "Dam.P".
✱
"Press"
7.7
Setting the output signal (S.TyP)
✱
Unlock the instrument, See section 7.2 "Unlocking the instrument (code
entry)", page 27.
✱
"Rotate" until the bottom line shows "S.TyP".
✱
"Press"
Example
4.20A = output signal 4 ... 20 mA
0.20A = output signal 0 ... 20 mA
0.10U = output signal 0 ... 10 V
Summary of Contents for 405052
Page 2: ......
Page 47: ...47 9 Setup program HP 1...
