Initial Operation
6
2.13.2018
1.
Initial Operation
1.1. Connecting to power supply
Caution:
•
This device may be attached to protected earth (PE) mains
power outlets only!
•
The mains plug serves as a reliable way to disconnect the
unit from its power supply for safety reasons and must be
readily accessible at all times.
•
Do not attempt to use the unit if the power cable is damaged!
•
Regularly inspect the power cable for damage.
•
No liability for improper power connection!
Compare the available mains voltage and mains frequency with the
specifications on the type label.
•
Connect the mains plug to a protected earth (PE) power
supply socket!
1.2. Switching the unit on / selecting language
Refer to >Settings menu< on
page 18 for language selection.
To switch the unit on:
Use the mains switch to bring the unit into operation.
The integrated lamp indicates that the power is on.
As initialization proceeds, the unit will assume the start positions
and emit mechanical sounds.
The unit's name and voltage type are displayed briefly.
The unit will enter the same operating mode that it was in before
shutdown, i.e.
manual model (operation with the unit's controls or
remote control (operation via PC).