Appendix
95
Error code Description
Solution
•
Check hose cross-section of connection
to application
•
Check connection to application is
clear
•
Check bath fluid for
specification/suitability
11.3 Modbus TCP/IP register
11.3.1 Data type
The Modbus protocol uses 16-bit registers for data transmission. Data that use
more than 16 bits must be divided into several registers. For values that are
divided into several registers, the registers are arranged according to the
Modbus format. For error-free communication, all bus devices need to use the
same format.
Float values are encoded in IEEE754 format (1 bit sign, 8 bit exponent, 23 bit
mantissa).
The Modbus protocol uses the data types listed in the table.
Data type
Registers
Explanation
short
1
Signed 16-bit value
ushort
1
Unsigned 16-bit value
int
2
Signed 32-bit value
uint
2
Unsigned 32 bit value
float
2
Floating point number with 32 bit
Summary of Contents for Magio MX
Page 100: ......
