Menu functions
9.4.
MENU CONFIG – Configuration of unit
Menu level 1
A RESET can be effected only in the >OFF< mode.
Switch off circulator by pressing the
key and call up the menu
CONFIGURATION.
Level 2
Parameter level
Press the key
if a parameter is to be
retained. Correction function for parameters and
values (prior to OK).
or
•
Switch on and off remote control by pressing
and
Control display in the topline
for Remote
For remote control refer to 59
Connect RS232 with PC.
or
•
Switch on and off autostart by pressing
and
AUTOSTART on = on
AUTOSTART off = off
See WARNING page 39
or
•
Switch on and off OFFMODE by pressing
and
PUMP ON continuous operation of circulating pump
PUMP OFF circulating pump is linked to Start/Stop
Level 3
Parameter level
•
Hours flash, set by pressing
+
•
Minutes flash, set by pressing
+
•
Day flashes, set by pressing
+
•
Month flashes, set by pressing
+
38
